Set of Elcon Rear Shock Absorbers for the HPI Baja. These shocks are high volume and non-leaking. Travel of this universal shock is enlarged by 10% in the same length!

These shocks feature Teflon coating on the housing to lower friction and wear. The piston is rounded and precisely fitting, creating a minimum contact surface for even less friction & wear. The piston rod is hardened, grinded, and will not corrode. The spring discs allow for maximum travel as the dirt scraper fits in the disc at full compression.

A special seal at the bottom keeps the shocker fully closed, even in dusty conditions. This seal also provides stick-slip resistance- meaning there is much less resistance than other currently used seals. The dampening process is therefore more true and not influenced by the high-friction o-rings can cause.

Because air cannot get in the oil medium, these shockers will not get soft or sponge-like.

Sold as a set of 2.

These RPM Front A-Arm sets were just released, and are generating a lot of excitement. They are available in black or white (The white is dyeable, so you can color them however you want). This arm set will work both right and left hand sides, so you will need to order qty 2 to replace all the front arms on your Baja.

These RPM Rear A-Arm sets were just released, and are generating a lot of excitement. They are available in black or white (The white is dyeable, so you can color them however you want). This arm set will work both right and left hand sides, so you will need to order qty 2 to replace all the rear arms on your Baja.

Full-Force RC shock boots are designed to cover up your shocks and keep out unwanted dirt and debris. Made from high quality lycra fabric which make our shock boots extremely durable. Our special triple stitch method guarantees that our stitching will hold up and as an added bonus allows you to cut them to size without any problems! We are offering these in complete sets of four (front and rear). Very simple install, simply slide over your springs, tuck the ends in, and put your springs back on. That's it! Something so simple can save you a load of money by protecting your shocks!

These springs are approx 20% stiffer than stock, and provide great appearance and functionality at a great price.

These springs are manufactured in the USA, and our high quality powdercoating and chrome finishes are applied locally.

These spring sets are available in chrome, raw, and a variety of powdercoated colors. We currently have Raw, Powdercoated Black, and Chrome in stock. More powdercoated colors will be available in a couple weeks (red, orange, blue, green, yellow, etc). As soon as these additional colors arrive into stock, we will update our website. 

Sold as a set of two (2)

These new Suspension Limiting Killer Kables from Killer RC will dramatically prolong the life of your HPI Baja's shocks and drive shafts. Without limiting cables the Baja's suspension will over-extend, causing the shock pistons to bottom out, which damages the piston, seals, and rod end. An over-extending suspension can also cause damage to your drive shaft pins and cups. With these Killer Kables you can spend more time running your Baja and less time repairing your Baja. Killer Kables fit on the HPI Baja RTR, SS, and 5T that have RPM or stock HPI suspension arms. Killer Kables may also work on aftermarket arms that have sway bar provisions. Killer Kables are made in the USA from the highest quality, aircraft grade, coated, Stainless Steel cable.