The Baja 5T Aluminum Steering Arm for HPI SFL-10 Servos is now available as a spare part.  This aluminum steering arm is built extra tough to handle the demands of 1/5^th scale vehicles. Use it as a replacement part on the Baja 5T HPI SFL-10MG2 servo, or as an upgrade to the stock plastic servo arm used on the SFL-10 and HPI SFL-MG servos used on the 5B as well. HPI recommends upgrading to the metal servo gears if upgrading the stock plastic servo arm.

The Baja 5T Aluminum Final Gear for HPI SFL-10 Servos is now available as a spare part.  This aluminum gear is built extra tough to handle the demands of 1/5th scale vehicles. Use it as a replacement part on the Baja 5T HPI SFL-10MG2 servo, or as an upgrade to the stock plastic final gear used on the SFL-10 and HPI SFL-MG servos. This package includes the heavy duty #87280 aluminum steering arm

This is the Futaba R603FF 2.4GHz FASST 3-Channel Receiver used in the 2.4GHz 3PM Pistol Grip Radio. Works well with 3PM, 3PK, 3PKS

FEATURES: Incredibly small and lightweight
Futaba Advanced Spread Spectrum Technology (FASST) allows receiver to
process information at eight times the resolution of standard
systems for unsurpassed control and smooth servo travel
One year limited waranty

INCLUDES: Futaba R603FF 2.4GHz FASST 3-Channel Receiver

REQUIRES: Futaba 3PM Computer Radio with the 2.4GHz FASST System (FUTK2020)

SPECS:    Reception Antenna: External
Power Requirement: 6V NiCd battery
Size: 1.5 x 1 x .55" (39 x 26 x 14mm)
Weight .45oz (12.8g)

This is a new-style Futaba replacement antenna for all three surface receivers R603FS R603FF and R604FS, the futaba antenna part number is HSP79452
This antenna is much easier to replace than the older style. The new antenna is coaxial and has a small clip at the base so it just snaps on and off. This is nice since it will make it a simple do-it-yourself antenna fix.

The Multiplex Rhino digi 4 Metal Gear servo was created for the 1/5 and 1/4 scale car market. The Rhino features a robust gear train, motor heat sink and large diameter super strong output shaft to give you the durability and performance you would expect from a Multiplex servo.

Alloy Horn for Multiplex RHINO Digi 4 Servo. Unlike stock plastic arms, this one is indestructible, and an almost essential addition to any Rhino. This is the new improved version.

Hitec servo engineers take a giant leap forward with the creation of the powerhouse HS-7955TG servo (note: the HS-5955 servo has been discontinued, and replaced with this one) This digital, programmable servo has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case. Works well as a replacement throttle/brake servo on the HPI Baja 5b and other large scale models
Specifications:
Motor Type: Coreless. Bearing Type: Dual Ball Bearing. Speed: 0.19 / 0.15 sec @ 60 deg.
English: Torque: 250 / 333 oz.in (4.8v/6v). Size: 1.57" x 0.78" x 1.45". Weight: 2.18oz. Metric: Torque: 18.0 / 24.0 kg.cm (4.8v/6v).Size: 40.00 x 20.00 x 37.00mm. Weight: 62.00g

FEATURES: FASST (Futaba Advanced Spread Spectrum Technology) sends twice as
            much information to the receiver at eight times the resolution of
            standard systems for unsurpassed control and smooth servo travel
          2.4GHz circuitry is wired directly into transmitter eliminating
            separate plug-in modules
          "Auto Detect" instantly determines whether HRS or PPM mode is active
            in the transmitter
          Special ID code prevents signal interruption by rejecting unwanted
            signals
          Brake mixing for large cars
          Anti-skid braking system (ABS)
          Throttle Acceleration (ACC) minimizes time lag before clutch and
            brakes are connected in gasoline engine cars
          Steering speed adjusts steering servo operating speed
          Racing timer
          Function select lever function
          In addition to great performance in R/C car and truck applications,
            this system is also ideally suited to the rigors of boat racing
          10 Model Memory
          One year limited warranty through manufacturer


INCLUDES:  2.4GHz FASST Futaba 3-Channel 3PMX transmitter
           2.4GHz FASST Futaba R603FF 3-Channel Receiver (FUTL7631)
           ON/OFF switch harness
           Instruction manual


REQUIRES: AA Batteries: Eight for transmitter
          Servos of modeler's choice


SPECS:    Transmitter;
            Current Drain: 250mA or less
            Transmitting Antenna: 2.4GHz


          Receiver;
            Reception Antenna: External
            Power Requirement: 6V NiCd battery
            Size: 1.5 x 1 x 0.55" (39 x 26 x 14mm)
            Weight 0.45oz (12.8g)