When changing or checking spark plugs for motor tuning this cover does not need to be removed. The HPI plug wrench works great with it. There is 3/4 inch clearance between the tip of the spark plug (without boot and wire) to the inside of the cover.

TR HD Tranny PLate - Turtle Racing has developed a HD Tranny plate to secure the Rear end of your Baja. This Tranny Plate is Twice as thick as the Stock Tranny PLate and is made from Billet 6061 aluminum. This HD Tranny plate will greatly reduce flex and help keep the whole Rear end of your Baja secure. It has been lightened as much as possible without reducing strength. This Tranny PLate was a natural progression to our HD Top PLate. We have also made a One piece PLate to secure the brake assembly using our tried and proven 4-point mount. One piece construction makes assembly and servicing the brake assembly a great deal easier! This also makes for a very solid Brake Assembly, greatly reducing flex. No matter what brakes you use, you will notice more solid, positive, brake action. We have also included FastEddy flanged bearings for the brake cam.
The HD Tranny Plate comes complete with the Tranny Plate, the One Piece Cover plate that secures the brake assembly, 2 FastEddy flanged bearings installed, and all SS screws to complete your installation.

New from Diego at Baja5bCustombuild, come these new aluminum rear upper plates for the HPI Baja 5b.

New Aluminum Underguard for HPI Baja 5b. This ultra-tough guard eliminates the need to keep replacing the stock plastic guard. This guard fixes into place just like the stock guard, all hardware and instructions are included for installation.

Protecta is proud to introduce the Protecta-Baja skid plate. With the recent growth in racing and heavy bashing of the Baja 5B, Protecta felt it was time to solve some issues suffered by racers and bashers alike.

If you have suffered from any of the following issues:
Broken pull start from sliding into obsticle sideways/t-boned by fellow racer
Broken spur gear/spur gear cover from sliding into obstacle/t-boned by fellow racer
Stock skid plate comes loose, and gets under rear wheels
Stock skid plate falls off
Stock skid plate wears out
Front of skid plate catches and gets ripped downward


The added protection from this Protecta product will help solve all of these issues. This "Protecta-Baja skid plate is constructed of .125 aluminum, press bent with an automated machine for consistency and accuracy. The skid plate is designed to fit up inside the lexan side pods. This design offers 2 extra holes per side to mount the lexan side pods in a fashion that allows you to cut the bottom of the pods off entirely, and eliminates the problem of tearing the lexan pods when bottoming out the car. The forward facing edge of the plate joins the top chassis rails, as to deflect the car into the air when hitting a good sized obstacle in a forward direction.

This skid plate install requires drilling 2 holes in the chassis, and installing 2 threaded inserts included with the kit. There will be a few extra moments involved in removing the skid plate for general maintenance. The kit includes all necessary hardware and instructions.

New from VG Racing! An indestructible steel roll cage built for the baja and made USA tuff! This cage looks great, and fits in and works perfectly. Allows for fit of the popular Dominator Rear-mount exhaust. Available in black, orange, chrome, and raw unplated. Includes all necessary hardware and instructions.

Note: The lower cage "L" bars are sold separately.

Lower Rail Set for VG Racing Roll Cage. Allows for fit of the popular Dominator Rear-mount exhaust.

Yep, its here! The wait is over. This cage is the most requested aftermarket parts in the baja industry. An indestructible steel roll cage built for the baja and made USA tuff! Available in Chrome,red,blue and flat black

. The Sand Rail Cage in now available. From the manufacturer that brought you the indestructible steel roll cage, These Chromoly Sand Rail Cages are built USA tuff!. Available in Chrome and Orange!

Includes: 100% Chromoly Tube Cage, Brushed Aluminum Side Panel, Aluminum Front Skid Plate, 26” Whip and Flag, Vinyl Graphics Kit

Fits HPI Baja 5B only

TGN’s new polished aluminum wing. Fits on your hpi Baja 5b just like your stock wing. Made of high grade sheet aluminum, riveted for a clean look and polished to a show stopping shine.

New from WORX an Australian made black poly carbonate bumper that can take a beating. It has a smooth black finish to easily slide over any obstacle in your way. Made from 10mm thick poly carbonate this bumper is a must have for the extreme Baja basher

Check out this new steel bumper from DarkSoul. Its their new Basher Bumper and it was designed to bend on impact and act as a “crumple zone” to absorb much of the energy from the impact. If you bend the bumper, you can fairly easily bend it back to shape with your hands. In severe crashes/impacts, you may need to remove the bumper to properly straighten it out, but please remember IT WAS DESIGNED TO BE BENT AND RESHAPED.

The DS bumper now comes with a large reinforcement steel plate welded to the lower half for an even stronger and longer lasting bumper. They now come with a nice clean black finish as well.

Fits HPI Baja 5b

The new DarkSoul billet scoop will soon be available for you hard core Baja fans. This beautiful piece of work is 3D machined from a solid piece of aluminum. Not only adding incredible looks to your Baja it also directs needed airflow to engine compartment.

Rhino Racing is the company who brought the industry its first full carbon fiber body for the hpi Baja 5b. It’s the same body used in the much read about Barstow to Vegas 120 mile drive done by hpi. TGN will be working closely with Rhino to help bring his products to the masses so check the site often for updates.

Check out the first production piece brought to you by Rhino Racing. It’s the new carbon fiber roof plate. It’s a great looking piece and it adds just the perfect touch of class to your ride.

Check out this new roof plate. It has a build in scoop for added style. The scoop comes un-trimmed so you decide if you want it opened or closed. It’s a great looking piece and it adds just the perfect touch of class to your ride.

Turtle Racing’s new series of HD parts are truly living up to their name and Turtle Racing’s reputation for high standards and tough products. Turtle Racing’s new HD Top Plate is more than capable of living up to these standards. This HD Top Plate is twice as thick as the stock plate, made out of 6061 Billet Aluminum and pocketed in all the right places for proper fit. The TR HD Plate is cut out specifically for a snug fit with the servo box, this was done to hold the servo box tight so stock servo box mounting hardware can be used with the same confidence of securing it with screws. ** Billet body mount seen in the installed pictures is not included **