The HPI Temp Gun is a non-contact infrared thermometer for measuring temperature. Use as a serious diagnostic tool when tuning motors for maximum performance. It can also be used to optimize the handling of race cars by checking tire and track surface temperatures. The result: Faster lap times and extended engine life! Features include an easy to read large LCD readout, ergonomic gun shaped design, quick point-and-click temperature detection, auto-shut-off mode for long battery life, and instant Fahrenheit to Celsius conversion for extra versatility

Piston stopper tool for engines with 10mm threads. Works on Zenoah G230RC / G260RC / G260PU / G260PUH / G231PUH / G231PUM / G260PUM / GZ25N14 / GZ25N23 engines. Also works on Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 / GP420 / GP460 engines. Also fits some pocketbike engines if high-performance headkit with 10mm spark plug is installed. In general, fits engines with 10mm spark plug hole threads (for example, engines which use NGK "C" class spark plugs like the CMR7H, CR8HIX, etc). Threads into spark plug hole and stops piston from moving, allowing easy removal of flywheel and other rotating parts. This stopper is interchangeable with Zenoah part # 4810-96220, and with HPI part # Z966.

More Photos - Piston Stopper Tool

Zenoah flywheel puller tool. Includes puller handle and assorted-size bolts. Works on most Zenoah and Chung Yang engines.

More Photos - mrc v2 rear bumper

Clear colored gasoline fuel line, priced by the foot. Select the number of feet you need. 1/4" outer diameter, 1/8" inner diameter.

AMS full chassis protection plate for the HPI Baja 5b. Tight fitting, high impact resistant plastic plate helps prevent damaged screws and chassis wear. The side & lower plastic plate directly mounts to the chassis. The front plate is bolted directly to the chassis for a firm connection. Kit contains plate and assembly material. Available in yellow or black

More Photos - AMS Full Chassis Protector for

Team FastEddy has developed a simple multi-tool for working with your dogbones. The primary function is to effortlessly install your boots without ripping or tearing them. Insert your dogbone into the end of your tool, add some lubrication, and effortlessly slide your boot onto the dogbone without damaging them. Other features of this tool include an easy way to center your pins while assembling aftermarket bones. The hole in the center of the tool will allow you to insert the set screw and tighten it with a hex wrench. Put the tool on the other side of your bone while using a hex wrench inserted into the cross hole for leverage, and tighten the set screw. The Team FastEddy Boot Installation tool is compatible with the HPI Stock bones, HD bones, and all available aftermarket bones. Also compatible with the Skunkworks CVs

Knight Research and Design Baja Work Stand and Tool Tray. This high quality stand is made of thick sheet steel with a durable black powder coat exterior. Features 2 lengths of center posts to allow you to adjust the height of the car to either 12” or 21” off the top of your workbench. The stand also has bushings that allow the car to spin freely to allow access to all sides of the car. The car sits tightly in a tray that captures and eliminates the car from moving side to side or front to back. Also comes with a strip of adhesive backed padding for the user to install as they see needed. You also get a nice tool tray that will also swivel as needed. So get your baja off that shoe box and onto a proper stand where it belongs

More Photos - Internal Masking Sticker Kits

More Photos - Internal Sticker Kits

More Photos - External Sticker Kits

The TGN billet spark plug cover cures two common problems found with the stock part. First we moved the wing forward a bit and cut a radius in it to allow you to use a deep socket or the stock plug wrench to remove the spark plug. This is handy for several reasons but mostly so you can test and tune your carb settings by checking your spark plugs condition while still having roll over protection. The second is that it being made of solid billet aluminum it’s stronger and will hold up to more abuse and will not fold or cave it like the stock plastic piece

More Photos - TGN Billet Spark Plug Cover

The latest billet gear cover by Python Motorsports.Needs a Python billet gear cap to enclose the cover. 

Check out this new Rear Bumper from HBZ. With its unique design and mounting system it’s sure to be one of your favorite aftermarket bumpers. These bumpers are specially designed to protect your DDM Tuned Pipe from getting damage and keeping the great low end that we all enjoy. Its strong, has a simple mounting system, it’s wrapped in a beautiful chrome job. Get these while they are HOT

New HBZ high voltage LED headlights. The new LED’s mount to your stock pods with a cool realistic clear cover that protects the 15 LED’s from damage. These lights are the BRIGHTEST on the market. Using the 12 volt lipo battery will allow light like nothing else available. These are high voltage LED’s and they are made to run off a separate power source in order to leave your stock battery free for its intended use. The kit comes with a convenient 9vlt adapter that can be wired in or you can use the HBZ li-po battery or any other power source up to 12vlts.