Top-quality K&N chrome air filter in choice of sizes. Base kit includes: K&N filter, clamp, and filter oil. Filter widths: 3", 3.5" pancake, 4.5" pancake (respectively). Optional velocity stack and/or choke available. Fits Zenoah G23LH / G2D / G43L / GZ25N14 / GZ25N23 / G230RC / G260RC / G231PUH / G260PUH / G260PU / G231PUM / G260PUM / G620PU engines. Also fits Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 engines. If you have:
A S25 / X25 / Geo-Sport / Geo-Bigfoot / GSR25 / GSR Sport with stock carburetor installed, select af318: GZ25N velocity stack.
A S25 / X25 / Geo-Sport / Geo-Bigfoot / GSR25 / GSR Sport with high-performance carburetor installed, select af200 or af315.
An engine with a Walbro WA-167 carburetor installed, select af200 or af311.
An engine with a Walbro WT series carburetor installed, select af310.
An engine with a Walbro WYK series carburetor installed, select af200 or af315.
A G23LH engine with stock carburetor, select af200 or af315.
A G43L engine with stock carburetor, select af310 or af315

Foam "Uni" filter with chrome top. 1.75" height - this smaller form factor allows it to fit where many other filters won't! Spring-loaded inner body allows filter to be compressed and springs back. Optional velocity stack and/or choke available. Fits Zenoah G230RC / G260RC / G231PUH / G260PUH / G260PU / G231PUM / G260PUM engines. Also fits Zenoah G23LH / G2D / G43L / GZ25N14 / GZ25N23 engines. Also fits Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 / GP420 / GP460 engines. If you have:
A S25 / X25 / Geo-Sport / Geo-Bigfoot / GSR25 / GSR Sport with stock carburetor installed, select af318: GZ25N velocity stack.
A S25 / X25 / Geo-Sport / Geo-Bigfoot / GSR25 / GSR Sport with high-performance carburetor installed, select af200 or af315.
An engine with a Walbro WA-167 carburetor installed, select af200 or af311.
An engine with a Walbro WT series carburetor installed, select af310.
An engine with a Walbro WYK series carburetor installed, select af200 or af315.
A G23LH engine with stock carburetor, select af200 or af315.
A G43L engine with stock carburetor, select af310 or af315.

Foam "Uni" filter with chrome top. 3" height. Spring-loaded inner body allows filter to be compressed and springs back. Optional velocity stack and/or choke available. Fits Zenoah G230RC / G260RC / G231PUH / G260PUH / G260PU / G231PUM / G260PUM engines. Also fits Zenoah G23LH / G2D / G43L / GZ25N14 / GZ25N23 engines. Also fits Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 / GP420 engines. If you have:
A S25 / X25 / Geo-Sport / Geo-Bigfoot / GSR25 / GSR Sport with stock carburetor installed, select af318: GZ25N velocity stack.
A S25 / X25 / Geo-Sport / Geo-Bigfoot / GSR25 / GSR Sport with high-performance carburetor installed, select af200 or af315.
An engine with a Walbro WA-167 carburetor installed, select af200 or af311.
An engine with a Walbro WT series carburetor installed, select af310.
An engine with a Walbro WYK series carburetor installed, select af200 or af315.
A G23LH engine with stock carburetor, select af200 or af315.
A G43L engine with stock carburetor, select af310 or af315.

DDM tall velocity stack and gasket. 30.5mm center to center bolt hole spacing. Longer intake tract for improved performance. 1" height. Fits Zenoah G23LH / G2D / G43L / G230RC / G260RC / G231PUH / G260PUH / G260PU / G231PUM / G260PUM engines. Also fits Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 engines. Fits Walbro WA / WT / WYK style carburetors

BLUR - Spritfilter. The Spritfilter has a "unique" cleaning function. Internal filter on the inside and perfectly sealed! Ideal for all RC Cars and Scooters with CY or Zenoah engines! The Spritfilter combo weighs only 8g. Spritfilter is red anodized and with an engraving "BLUR"

TGN Billet Air Filter. Compact design with dual filter element inside with built in velocity stack. All hardware and instructions included.

Made to fit over 3” round filters, often aftermarket filters like K&N and UNI filters.They have an elastic edge on them to make installation a snap.

Keep unwanted dirt, water and sand away from your filter all while creating a killer look with some extra color. Your stock filter will last longer and you will have to clean it less often when using this pre-filter. They are washable and reusable and simple to install. Choose your color.

Stock filter on the HPI Baja 5b

This is not a standard scooter type pre-filter, this is made to the dimensions of your HPI stock pre-filter.

Keep unwanted dirt, water and sand away from your stock filter all while creating a killer look with some extra color.

Your stock filter will last longer and you will have to clean it less often when using this pre-filter. They are washable and reusable and simple to install. Choose your color.

Most 23-30cc Zenoah or Zenoah cloned motors (CY) fitted in a HPI Baja 5b or most other r/c cars and scooters.

Use this Outwears Pre-Filter on your HPI Baja 5b pull start. The pre filter will reduce the amount of weeds, grass and dirt that will enter you pull start thru the large openings found on the pull start. Garbage that gets into your pull start will not only make pull starting difficult but will also reduce the amount of air that comes into your flywheel and possibly overheat your engine.

They are washable and reusable and come complete with instructions and hardware.

DDM billet high-flow air filter from ADA. Extremely compact at just 2.5" diameter and 1.625" tall. Dual inner foam element design provides maximum filtration. Includes integrated velocity stack.

The new TGN filter cap is made of solid billet aluminum. Adds a nice clean aftermarket look to your great working stock filter. For an added feature we have machined in a small grease lip inside the cap to help further seal the cap against the filter. This is called a grease lip because experienced off road drivers will take grease or petroleum jelly and put it between any a surface your filter touches, thus eliminating any area the dirt can enter your intake. A must for a fully equipped Baja.

Choose from these colors, 2288-RD=red, 2288-BL=blue, 2288-PU=purple, 2288-SV=silver, 2288-OR=orange, 2288-BK=black

A unique product brought to the R/C industry for the first time by TeamGoNads. This dual stage pre-filter will fit over most aftermarket air filter like K&N and UNI filters that are around 3” in diameter. The length can be trimmed easily.

Keeps dangerous dirt, sand, dust and mud out of your engine. All serious off-readers will agree that there is no better protection than an oiled foam filter. Users must use a foam filter oil for proper results (not included). Users must always test for proper movements of throttle linkage after installation. Some trimming on the outside of the filter may be required.

TGN Dual Stage Pre-Filter (also know as the RedNeck)

 All stock filters found on the FG MT-5 and some on road cars. Will also fit many aftermarket filters (K&N style).

The new TGN dual stage pre filter is a must have for all serious off road drivers. This filter allows you to run the stock air filter and foam element (know to be the best option in the industry) at the same time giving you that extra protection needed when driving in dirt, mud and sand. For best results the pre filter should be oiled down with a foam filter oil.

Stock filter on the HPI Baja 5b (use model # 3220 if you have an aftermarket filter)

This is a special made RedNeck that was custom made for the HPI Baja 5b. It replaces the stock outer stage filter found on your car. Now you will have 3 stages of protection with the famous RedNeck pre-filter added to the inside single stage your car already has..

Keeps dangerous dirt, sand, dust and mud out of your engine. All serious off-readers will agree that there is no better protection than an oiled foam filter. Users must use a foam filter oil for proper results (not included). Users must always test for proper movements of throttle linkage after installation. Some trimming on the outside of the filter may be required.

Short on space? Want a quality UNI foam filter? This one is for you. We believe this is the shortest filter on the market and its made just for TeamGoNads. The body of the filter is right at 1” deep. That’s ½” less than the others we have seen on the market. This filter fits over any 1-3/4” velocity stack and holds on with the included hose clamp. Chrome cap and internal spring for added strength and rigidity make this one a winner!

23-31cc engines found on large scale cars and trucks.



TGN Billet Velocity Stack with included o-ring. Velocity stacks are needed to install aftermarket filters for CY and Zenoah engines.

Stock shocks on the HPI Baja 5b

Keep unwanted dirt, water, rocks and sand away from your fragile shocks all while creating a killer look with lots of style and color.

Your shocks will last longer than ever before with these washable and reusable shock covers. Simple and clean velcro installation. Kit includes 4 shock covers